The most common reason for a hardwood floor refinishing is to protect the existing finish. However, there are some ways to ensure that a new layer is adhering to the existing finish. Here are a few tips to make the refinishing process go as smoothly as possible. First, make sure that the floor is completely clean. Then, apply a thin coat of finishing agent. The final layer is a glossy, durable layer.
Before refinishing a hardwood floor, you must prepare it properly. It is best to do this before moving into the new home. While refinishing a floor is easy to do by yourself, it is much more satisfying to have a professional do it for you. The process of refinishing hardwood floors requires that you clear the area of furniture, shoes, and other objects. After you have finished the preparation, you can apply the finish. This finish needs to dry for a full 24 hours before you walk on it. You should leave the hardwood floors wet for up to four days.
Before you begin refinishing your hardwood floor, you should make sure to determine exactly what type of flooring you have. The most common type of hardwood flooring is solid, which means it can be refinished four or five times. The remaining thickness will depend on the age and maintenance of the floor. Luckily, the average solid hardwood floor can be refinished four or five times before it needs to be replaced. If you have a solid floor, you may not need to measure it – but you should still measure the thickness and depth of the remaining floor to avoid damaging the wood.
Before you begin refinishing a hardwood floor, it is important to determine the type of finish used on the floor. If you can find a floor that has a low veneer, you can easily refinish it two or three times. If you have a floor that is more than 3/16 inches thick, you can refinish it up to four times. In addition, you should check the thickness of the veneer before refinishing the floor. You can also check the thickness by checking the receipts of the flooring you purchased.
Refinishing your hardwood floor requires several steps. It involves removing old floorboards and repairing any damage. You will also have to grind down any uneven boards. Depending on the type of finish, you should consider the type of flooring you have, as well as the amount of time you have to invest in the project. Some types of flooring require extensive preparation. If you have a floor that is too worn or has too many cracks, you should remove it first.
During the refinishing process, it is important to prepare your floors properly. In most cases, a homeowner prefers to refinish the floors before moving. In such cases, it is best to prepare the entire area before applying the finish. You should clear all items from the room. After refinishing, you should allow 24 hours for the finish to dry. It is best to leave the floor bare for three to four days to allow the refinishing process to do its magic.